Siding for HOAs, property managers and multi-family properties
First Impressions Exteriors installs vinyl, LP SmartSide, James Hardie fiber cement and steel siding in Minnesota and Wisconsin.
Request a WalkthroughCall 763-762-8934Why work with First Impressions Exteriors
- One project lead, with clear communication throughout the job
- 7-year workmanship warranty on commercial and multi-family work
- Building-by-building scheduling
- Tenant notices
- Help with HOA approval packets
- A+ on BBB, accredited since 2015, 18 years in business
- Roofing, siding, windows and gutters from one contractor, including commercial and multi-family roofing
Request a walkthrough
What each decision-maker is weighing
HOA, condo and townhome boards
Does the new material fit our association documents? Which approvals do we need? Can we compare bids fairly?
Property managers
What is the schedule by building? Who is on site and who do we call? How is hidden damage handled?
Apartment owners
How do we keep upkeep low? What happens to parking and access? Are the buildings older than 1978?
Senior living operators
How is work sequenced around residents? How are noise and dust handled? What inspections apply?



From first walkthrough to final inspection
One project lead stays with your buildings from the first visit to the city's sign-off, so the board and the property manager always know who to call.
Walk the buildings
We look at the siding, trim, soffits and problem areas with you or your manager, and talk through how the property is used.
Settle scope and approvals
We help with HOA approval packets so the board and any review committee have what they need to decide.
Permits
We pull the building permit for the work, so the cost and the inspections are planned from the start.
Schedule building by building
The work is scheduled one building at a time, with tenant notices so residents know what is coming.
Install with one point of contact
Your project lead gives clear updates throughout the job, to the board, the manager or the owner.
Inspection and sign-off
The city inspects the work as the permit requires and signs off on the finished job.
The wall matters as much as the boards
New siding only protects a building if the wall behind it keeps water out. Ask every bidder how each of these four is handled, and make sure it is written into the scope.
Water-resistive barrier
The layer behind the siding, often called house wrap, that keeps water out of the wall.
Flashing
Corrosion-resistant material at windows, doors, roof-to-wall joints, porches and decks that sheds water out and away from the wall.
Kickout flashing
Where a sloped roof ends against a wall, it diverts water away from the siding.
Sheathing and framing
Rotted or damaged sheathing and framing found once the old siding is off. Agree up front how it is priced.
Permits and inspections depend on the building. Minnesota's re-siding fact sheet is written for dwellings under the Minnesota Residential Code, which covers detached one- and two-family dwellings and certain townhouses. For those, it calls for a building permit, inspection of the barrier and flashing, kickout flashing on re-sides, and replacement of rotted sheathing and framing. Apartment and senior living buildings fall under the Minnesota Building Code, so your city building department decides which permits and inspections apply. We pull the permit, and the city signs off on the inspection.
The EPA's lead-safe rule can apply to paid work that disturbs paint in houses, apartments and child-occupied facilities built before 1978. It does not cover housing built in 1978 or later, or housing specifically for elderly or disabled people unless children under six live there. Put the build year in your bid request.
Sources: Minnesota Department of Labor and Industry, Re-siding and the 2020 Minnesota Residential Code, and its fact sheets on the 2020 Minnesota Residential Code and Building Code; US EPA, Lead Renovation, Repair and Painting Program.
Phasing the work around residents
On an occupied property, the order of the work shapes the whole job. These are the points boards and managers usually settle first.
Building by building
One building is finished before the next one opens. It is easiest on residents and easiest to explain.
Elevation by elevation
The same side of several buildings is done together, so equipment moves less. More residents are affected at once.
Stack or floor
On larger buildings, work goes by vertical stack or by floor, so less wall is open at one time.
What the plan should cover
- Parking and staging. Where lifts, dumpsters, deliveries and crew vehicles go.
- Entries and walkways. A clear path to every unit stays open.
- Patios and balconies. Residents need notice to clear them before their wall opens.
- Utilities and wall penetrations. Meters, vents, hose bibs and lights are worked around, or shut off briefly with notice.
- Work hours and noise. Agree on hours before the crew starts.
- Pets and landscaping. Protect plantings and irrigation near the walls.
- Resident notices. A notice before each phase, a reminder before the crew arrives, and a contact name and number during the work.
- Senior living. Add quiet hours, dust control and clear, accessible entrances.
Siding we install
Vinyl
Cost-effective and low upkeep, in many colors, textures and styles. It never needs painting.
LP SmartSide
A natural wood look, made to resist moisture and insects. Prefinished colors or painted.
James Hardie
Resists rot and termites. James Hardie makes its HZ5 line for climates with freezing temperatures.
Steel siding
Low upkeep with a clean, modern look. We install Edco ENTEX.
Choosing a material comes down to what your association documents allow, how the new color and profile match the existing buildings, upkeep over time and budget. Ask for physical samples, and keep the same color and profile across every phase.
See all siding materials in depthWhat a complete bid covers
A bid that names each of these can be compared line by line. A single lump sum cannot.
- Siding. Brand, profile and color.
- Removal. Tear-off and disposal of the existing siding.
- Barrier and flashing. Including kickout flashing.
- Trim, soffit and fascia.
- Hidden damage. How rotted sheathing and framing are priced, agreed before work starts.
- Permits and inspections. Who handles each one.
- Phasing plan. The order of work and the schedule by building.
- Site logistics. Parking, staging and dumpsters.
- Resident notices. Who sends them and when.
- Cleanup. Daily and at the end of each building.
- Insurance and references.
- Warranty. Workmanship and manufacturer terms, both in writing.
What helps us scope your buildings
You do not need everything on this list. Whatever you have makes the first visit more useful.
- Your association documents and any architectural standards.
- The number of buildings and the approximate year they were built.
- Where you see leaks, soft spots, staining or swelling.
- Past siding work, and any insurance claim on the siding.
- Parking, access and site notes for the property.
- The board and property manager contacts.
Questions from boards and property managers
Do you install siding on HOA, townhome and multi-family buildings?
We install siding on residential buildings and take on multi-family and association properties. Tell us about the buildings and we will set up a walkthrough to discuss scope.
Which siding materials do you install?
Vinyl, LP SmartSide engineered wood, James Hardie fiber cement and steel siding. Each has a different look, upkeep and cost, and the right one depends on the buildings and your association documents.
Do we need approval before choosing a siding material?
That depends on your association. Review your association documents and confirm any approvals before choosing materials. We help with HOA approval packets.
Who is responsible for the siding, the association or the owners?
That depends on your association documents. Review them to see how exterior walls are covered before you ask for bids.
Is a building permit required to re-side a building?
The Minnesota Department of Labor and Industry says building permits are required to re-side existing dwellings and structures. Its fact sheet is written under the Minnesota Residential Code, which covers detached one- and two-family dwellings and certain townhouses. Apartment and senior living buildings fall under the Minnesota Building Code, so ask your city building department which permits and inspections apply. We pull a building permit on all the work we do, and the city signs off on the inspection.
Does the age of the building matter?
It can. The US EPA's Renovation, Repair and Painting rule can apply to paid work that disturbs paint in apartments and other housing built before 1978. It has exemptions, such as housing built specifically for elderly or disabled people unless children under six live there. Tell any contractor the build year before you ask for a bid.
Can residents stay in their homes during the work?
Yes. Work is scheduled building by building, with tenant notices, so residents know what is coming. Plan parking, access and any patio or balcony clearing ahead of each phase.
How long will a project take?
It depends on the number of buildings, their height and access, and what is found behind the old siding. Ask every bidder for a schedule by building so you can see the order and the timing.
What happens if rot is found under the old siding?
For dwellings, Minnesota's re-siding guidance says rotted or damaged sheathing, framing and insulation must be replaced once the siding is off. Whatever the building, agree in the scope how that is priced before work starts.
How do we keep color and profile consistent across buildings?
Choose the color and profile for the whole property up front, ask for physical samples, and keep the same product across every phase. If a product named in your standards is no longer made, ask for the closest current match in writing.
Do you work with property management companies?
Yes. Tell us who the contacts are at the management company and on the board. Your project lead keeps clear communication going with both throughout the job.
What warranty applies?
We offer a 7-year workmanship warranty on commercial and multi-family work. Siding manufacturers also have their own product warranties, and they differ by product, so ask for both in writing.
Can roofing, gutters and siding be done together?
Yes. We also work on commercial and multi-family roofing, and planning the whole exterior together can reduce repeat visits to the property.
What should we have ready for a walkthrough?
Your association documents, the number of buildings and their approximate build year, where you see leaks or damage, and the board and manager contacts. The list above covers the rest.
Sources: Minnesota Department of Labor and Industry, Re-siding and the 2020 Minnesota Residential Code, and its fact sheets on the 2020 Minnesota Residential Code and Building Code; US EPA Lead Renovation, Repair and Painting Program.
Planning a siding project for your property?
Tell us about the buildings and we will set up a walkthrough.
Request a WalkthroughCall 763-762-8934